#80589 - HPI SFL-10 MG SERVO (METAL GEAR/24.0kg-cm 6.0V)

Genuine HPI quality spare part for easy maintenance and repairs. This is an upgraded steering servo for the Baja 5B 1/5th scale buggy. It features metal gears for extreme durability and is rated at 24kg/cm at 6v, making it extremely powerful and perfect for the heavy duty steering job required by the Baja! The standard plastic gear servo is rated at 6.5kg/cm.

You can also upgrade your standard #80563 SFL-10 servo to a metal gear drivetrain with the #80584 Metal Gear Conversion Set.

The SFL-10MG features standard screw hole spacing and a 25 tooth spline.

NOTE: NOT WATERPROOF! Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.